Mighty Marker® Bleed-Thru Ink Water-Based Primers
Low VOC, non-hazardous bleed-thru ink markers that mark bare metal. Stay visible through a water-based primer, and seal away clean when the work is done.
IM-63 Mighty Marker® Bleed Thru Ink - Medium
IM-64 Mighty Marker® Bleed Thru Ink - Super Jumbo
IM-65 Mighty Marker® Bleed Thru Ink - Tall Bottle
Compare Bleed-Thru Ink Water-Based Primer Markers
Manufactured in USA byArro-Mark®
Swipe to compare →
| IM-63 Clip Medium | IM-64 Super Jumbo | IM-65 Tall Bottle |
|---|---|---|---|
| Price | $6.95 | $9.25 | $11.00 |
| Nib / Tips Available |
|
|
|
| Stroke Widths Available | 2.3mm Bullet | Varies by angle: 2.0mm, 7.0mm, 15.0mm Chisel | 12mm Dauber |
| Content Capacity | 10ml | 30ml | 45ml |
| Clip Cap | ✔ | — | — |
| Key Feature | 2.3mm replaceable bullet nib, 10mL capacity, Low VOC formula. | Single broad-edge tip with 3 line widths, 30ml capacity. | Large dauber applicator, 45ml capacity, tall bottle format. |
| Shop IM-63 Clip Medium | Shop IM-64 Super Jumbo | Shop IM-65 Tall Bottle |
Need a different stroke width, color, or configuration? We can accommodate custom requirements → Request a Custom Solution
Where Bleed-Thru Ink Water-Based Primer Markers Work
Why Buy A Mighty Marker®
Behind every Mighty Marker® is 70+ years of craftsmanship, in-house formula development, custom engineering, and compliance-ready manufacturing. Designed to solve your exact marking challenge.
Let's Engineer the Right Marker
Can't find a marker that does exactly what you need? Arro-Mark® will engineer a custom marker to your spec.
Frequently Asked Questions
Does Arro-Mark® offer custom marker solutions for specific applications?
Mighty Marker® Bleed-Thru for Water-Based Primers is a low VOC, non-hazardous marker line built for one job most markers can't do: mark bare, unpainted metal so the layout lines stay visible through a water-based primer during layout and prep. The ink penetrates the primer layer instead of disappearing underneath it, so structural steel and metal fabrication marks remain readable while the work is in progress.
Bleeds Through Water-Based Primer, Then Seals Away Clean
Available in three formats, IM-63 (10mL, reversible 2.3mm bullet nib with a belt clip), IM-64 (30ml, single broad-edge tip with three usable line widths), and IM-65 (45ml, large dauber applicator for broad single-dab coverage).
Seal marks with an oil-based sealant when the layout work is done, the surface becomes completely flush with no visible trace of the original mark. Rated from 32°F to 100°F (0°C to 38°C).
Where Mighty Marker® Bleed-Thru for Water-Based Primers Marking Matters Most
Mighty Marker® Bleed-Thru for Water-Based Primers marking shows up in metal fabrication, manufacturing, and construction, wherever bare metal gets marked ahead of a water-based primer coat, including enclosed or ventilation-limited work areas where a low VOC, non-hazardous formula matters.
It's built for steel and bare metal surfaces, including oily metal conditions. If the job calls for an oil-based primer instead, our Mighty Marker® Bleed-Thru for Oil-Based Primers line delivers the same bleed-thru result in a different chemistry.
Your Needs, Our Expertise
Markers built for your unique surface, condition, application and compliance.
Request Custom MarkersWe're here to help with technical questions, choosing a marker, or order status.
Talk to an Expert